Meanwell Driver 180~240W Constant Voltage + Constant Current LED Driver Elg-240meanwell Driver 180~240W Constant Voltage + Constant Current LED Driver Elg-240

Meanwell Driver 180~240W Constant Voltage + Constant Current LED Driver ELG-240FeaturesConstant Voltage + Constant Current mode outputMetal housing design with functional GroundBuilt-in active PFC functionNo load / Standby power consumption 50000 hours5 years warranty ApplicationsLED street lightingLED architectural lightingLED bay lightingLED floodlightingType "HL" for use in Class I, Division 2 hazardous (Classified) location.DescriptionELG-240 series is a 240W AC/DC LED driver featuring the dual mode constant voltage andconstant current output. ELG-240 operates from 100~305VAC and offers models with different rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40ºC ~ +90ºC case temperature under free
air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series
to fit both indoor and outdoor applications. ELG-240 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system
Model Encoding

Type	IP Level	Function	Note
Blank	IP67	Io and Vo fixed.	In Stock
A	IP65	Io and Vo adjustable through built-in potentiometer.	In Stock
B	IP67	3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)	In Stock
AB	IP65	Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)	In Stock
DA	IP67	DALI control technology.	In Stock
Dx	IP67	Built-in Smart timer dimming function by user request.	By request
D2	IP67	Built-in Smart timer dimming and programmable function.	In Stock
BE	IP67	3 in 1 dimming function and Auxiliary DC output	In Stock

SPECIFICATION

MODEL			ELG-240-24		ELG-240-36		ELG-240-42	ELG-240-48	ELG-240-54
OUTPUT	DC VOLTAGE		24V		36V		42V	48V	54V
	CONSTANT CURRENT REGION Note.2		12 ~ 24V		18 ~ 36V		21 ~ 42V	24 ~ 48V	27 ~ 54V
	RATED CURRENT		10A		6.66A		5.71A	5.0A	4.45A
	RATED POWER		200VAC ~ 305VAC
			240W		239.76W		239.82W	240W	240.3W
			100VAC ~ 180VAC
			180W		180W		179.76W	180W	180.36W
	RIPPLE & NOISE (max.) Note.3		200mVp-p		250mVp-p		250mVp-p	250mVp-p	350mVp-p
	VOLTAGE ADJ. RANGE		Adjustable for A/AB-Type only (via built-in potentiometer)
			22.4 ~ 25.6V		33.5 ~ 38.5V		39 ~ 45V	44.8 ~ 51.2V	50 ~ 57V
	CURRENT ADJ. RANGE		Adjustable for A/AB-Type only (via built-in potentiometer)
			5 ~ 10A		3.33 ~ 6.66A		2.86 ~ 5.71A	2.5 ~ 5A	2.23 ~ 4.45A
	VOLTAGE TOLERANCE Note.4		±2.0%		±2.0%		±2.0%	±2.0%	±2.0%
	LINE REGULATION		±0.5%		±0.5%		±0.5%	±0.5%	±0.5%
	LOAD REGULATION		±0.5%		±0.5%		±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME Note.6		500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
	HOLD UP TIME (Typ.)		10ms/ 230VAC 10ms/ 115VAC
INPUT	VOLTAGE RANGE	Note.5	100 ~ 305VAC         142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
	FREQUENCY RANGE		47 ~ 63Hz
	POWER FACTOR		PF>=0.97/115VAC, PF>=0.95/230VAC, PF>=0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
	TOTAL HARMONIC DISTORTION		THD< 20%(@load>=50%/115VC,230VAC; @load>=75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section)
	EFFICIENCY (Typ.)		92%		92%		92.5%	93%	93%
	AC CURRENT		2.2A / 115VAC	1.5A / 230VAC		1.2A/277VAC
	INRUSH CURRENT(Typ.)		COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
	MAX. No. of PSUs on 16A CIRCUIT BREAKER		4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
	LEAKAGE CURRENT		<0.75mA / 277VAC
	NO LOAD / STANDBY POWER CONSUMPTION Note.7		No load power consumption <0.5W for Blank / A / Dx / D-Type Standby power consumption <0.5W for B / AB / DA-Type
PROTECTION	OVER CURRENT		95 ~ 108%
			Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT		Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE		27 ~ 34V		42 ~ 49V		47 ~ 54V	54 ~ 63V	60 ~ 67V
			Shut down output voltage, re-power on to recover
	OVER TEMPERATURE		Shut down output voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.		Tcase=-40 ~ +90ºC (Please refer to " OUTPUT LOAD vs TEMPERATURE" section)
	MAX. CASE TEMP.		Tcase=+90ºC
	WORKING HUMIDITY		20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +90ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT		±0.03%/ºC (0 ~ 60ºC)
	VIBRATION		10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS		UL8750(type"HL"), CSA C22.2 No. 250.13-12;IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13 independent, EN62384; EAC TP TC 004;BIS IS15885(for 24/24B/36/36A/42/42A/48/48A/54/54A only);GB19510.14,GB19510.1; IP65 or IP67; KC61347-1,KC61347-2-13 approved
	DALI STANDARDS		Compliance to IEC62386-101, 102, 207 for DA-Type only
	WITHSTAND VOLTAGE		I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
	ISOLATION RESISTANCE		I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH
	EMC EMISSION		Compliance to EN55015,EN61000-3-2 Class C (@load>=50%) ; EN61000-3-3;GB17625.1,GB17743;EAC TP TC 020; KC KN15,KN61547
	EMC IMMUNITY		Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 02; KC KN15,KN61547
OTHERS	MTBF		826.7K hrs min.      Telcordia SR-332 (Bellcore) ;     200.8Khrs min.  MIL-HDBK-217F (25ºC)
	DIMENSION		244*71*37.5mm (L*W*H)
	PACKING		1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25ºC of ambient temperature. Please refer to "DRIVING METHODS OF LED MODULE". Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. No load/standby power consumption is specified for 230VAC input. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70ºC or less. Please refer to the warranty statement on MEAN WELL's website at http:// The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft). For any application note and IP water proof function installation caution, please refer our user manual before using. https:///Upload/PDF/LED_EN.pdf

Contact us if you need more details on Meanwell Driver. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Meanwell Power Supply、Meanwell Elg Series Driver. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Meanwell Driver